EasyManuals Logo

Supero SUPER P4DC6 User Manual

Default Icon
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Chapter 1: Introduction
1-19
1-7 Super I/O
The functions of the disk drive adapter for the Super I/O chip include a
floppy disk drive controller that is compatible with industry standard 82077/
765, a data separator, write pre-compensation circuitry, decode logic, data
rate selection, a clock generator, drive interface control logic and interrupt
and DMA logic. The wide range of functions integrated onto the Super I/O
greatly reduces the number of components required for interfacing with
floppy disk drives.
The functions of the disk drive adapter for the Super I/O chip include a
floppy disk drive controller that is compatible with industry standard 82077/
765, a data separator, write pre-compensation circuitry, decode logic, data
rate selection, a clock generator, drive interface control logic and interrupt
and DMA logic. The wide range of functions integrated onto the Super I/O
greatly reduces the number of components required for interfacing with
floppy disk drives. The Super I/O supports four 360K, 720K, 1.2M, or 1.44M
disk drives and data transfer rates of 250 Kbps, 500 Kbps or 1 Mbps.
It also provides two high-speed, 16550 compatible serial communication
ports (UARTs), one of which supports serial infrared communication. Each
UART includes a 16-byte send/receive FIFO, a programmable baud rate
generator, complete modem control capability and a processor interrupt sys-
tem. Both UARTs provide legacy speed with a baud rate of up to 115.2
Kbps as well as an advanced speed with baud rates of 250 Kbps, 500
Kbps or 1 Mbps to support higher speed modems.
The Super I/O supports one of the following: PC-compatible printer port
(SPP), bi-directional printer port (BPP), Enhanced Parallel Port (EPP) or Ex-
tended Capabilities Port (ECP). The Super I/O provides functions that com-
ply with ACPI (Advanced Configuration and Power Interface), which in-
cludes support of legacy and ACPI power management through an SMI or
SCI function pin. It also features auto power management to reduce power
consumption.
The IRQs, DMAs and I/O space resources of the Super I/O can adjust flex-
ibly to meet ISA PnP requirements, which suppport ACPI and Advanced
Power Management (APM).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supero SUPER P4DC6 and is the answer not in the manual?

Supero SUPER P4DC6 Specifications

General IconGeneral
BrandSupero
ModelSUPER P4DC6
CategoryMotherboard
LanguageEnglish

Related product manuals