SUPER P4DC6/P4DC6+/P4DC6+II/P4DCE/P4DCE+/P4DCE+II User’s Manual
4-24
Save & Exit Setup
If you highlight the letter "Y" and press <Enter> with the "Save & Exit Setup"
field highlighted, you will save the changes you've made in the BIOS program
(CMOS) and then exit setup. Your system should then continue with the boot-
up procedure. The options are "Y", and "N."
Exit without Saving
If you highlight the letter "Y" and press <Enter> with the "Exit without Saving"
field highlighted, any of the changes you've made in CMOS will not be saved
when you exit the CMOS Setup. Your system should then continue with the
boot-up procedure.
Load Fail-Safe Defaults
When the item "Load Fail Safe Defaults" is highlighted, press the <Enter> key to
activate the dialogue box. Press the "Y" key to load the BIOS Fail-Safe default
values for the most stable system operation. The settings are "Y" and "N."
Select "Exit" from the "Main Menu" bar and press the <Enter> key to
activate the following screen:
4-9 Exit Setup
To Next Page
Loading...
Need help?
General
