4-23
Chapter 4: AwardBIOS
Set Supervisor's Password
When the item "Set Supervisor Password" is highlighted on the above screen,
press the <Enter> key to activate the following screen. When prompted, type
a password in the dialogue box to establish or to change the Supervisor's
Password.
Set User's Password
When the item "Set User's Password" is highlighted on the Security Main Menu,
press the <Enter> key to activate the password screen. When prompted, type
a password in the dialogue box to establish or to change the User's Password.
Security Option
When the item "Security Option" is highlighted on the Security Main Menu, press
the <Enter> key to activate the Security Option screen. This option allows the
user to determine if the password is required every time the system boots up
or only when you enter the CMOS setup. The settings are "System" and
"Setup."
To Next Page
Loading...
