4-21
Chapter 4: AwardBIOS
4-7 Boot-up Devices
When the Item "Boot" is highlighted on the main menu bar, press the <Enter>
key to activate the following screen:
Award BIOS attempts to load the operating system from devices specified by
the user in a user-specified sequence.
Boot ROM Order
This option determines the boot ROM order. The settings are "Adaptec-7899"
and "Any PCI Slot".
First Boot Device
This item allows the user to select the device as the first boot-up device. The
settings are "Floppy", "LS120", "HDD-0", "SCSI", "CDROM", "HDD-1", "HDD-2"
and "HDD-3."
Second Boot Device
This item allows the user to select the device as the second boot-up device.
The settings are The settings are "Floppy", "LS120", "HDD-0", "SCSI", "CDROM",
"HDD-1", "HDD-2" and "HDD-3."
To Next Page
Loading...
Need help?
General
