SUPER P4DC6/P4DC6+/P4DC6+II/P4DCE/P4DCE+/P4DCE+II User’s Manual
4-8
Typematic Delay
This option sets the delay time after a key is held down before it begins to
repeat the keystroke. The settings are: "250", "500", "750" and "1000."
OS Select For DRAM > 64MB
This option allows the user to select the operating system that requires a DRAM
memory greater than 64MB in order to function properly. The settings are "OS2"
and "Non OS2."
Console Redirection
This option allows the user to redirect the console (display) through the COM
port when enabled. This is useful when two computers are hooked up to a
single monitor. When enabled, the user can toggle the display from one system
to the other using the <Tab> key. The function keys are diabled when the
Console Redirection setting is enabled. The settings are "Enabled" and
"Disabled."
Agent After Boot
This option allows the user to keep the agent running after OS boot when
Enabled. The settings are "Enabled" and "Disabled."
Power On after PWR Fail
This option allows the user to determine if the system's power will be
automatically turned "on" or remains "off" after a power failure. The settings
are "On", "Off" and "Former Status."
Full Screen Logo Show
This option controls whether the logo is displayed when booting up. The
settings are "Enabled" and "Disabled."
To Next Page
Loading...
Need help?
General
