SUPER P4DC6/P4DC6+/P4DC6+II/P4DCE/P4DCE+/P4DCE+II User’s Manual
4-10
DRAM Data Integrity Mode
This section documents the AwardBIOS management of the bus links between
the host and bridge devices. The settings are "ECC" and "Non-ECC."
Delayed Transaction
If "Enabled", this option allows the user to activate the BIOS support to allow
the system to complete delayed transactions. The settings are "Enabled" or
"Disabled."
AGP Aperture Size <MB>
This section determines the amount of RAM dedicated to AGP data. The
settings are: "4", "8", "16", "32", "64", "128" and "256."
Delay Prior to Thermal
This setting determines the time in minutes between the thermal limit being
exceeded and the system automatically shutting down. The settings are: "4
min", "8 min", "16 min", and "32 min."
On-Chip Primary PCI IDE
If "Enabled", this option allows the user to activate the BIOS to support the On-
Chip Primary PCI IDE. The settings are "Disabled" and "Enabled."
On-Chip Secondary PCI IDE
If "Enabled", this option allows the user to activate the to BIOS support the On-
Chip Secondary PCI IDE. The settings are "Disabled" and "Enabled."
USB Controller
If "Enabled", this option allows the user to activate the BIOS to support the USB
Controller. The settings are "Disabled" and "Enabled."
USB Keyboard Support
If "Enabled", this option allows the user to activate the BIOS to support a USB
keyboard at boot-up. The settings are "Disabled" and "Enabled."
To Next Page
Loading...
Need help?
General
