Chapter 4: AMI BIOS
4-7
Enhanced C State (Available when CPU C State Report is Enabled)
Use this feature to enable enhanced CPU sleep state reporting. The options
are Enabled and Disabled.
CPU Hard C4E (Available when CPU C State Report is Enabled)
Use this feature to enable the hard C4E function reporting. The options are
Enabled and Disabled.
C4 Exit Timing (Available when CPU C State Report is Enabled)
This feature allows the user to control how quickly the CPU voltage will stabilize
when exiting from a C4 state. The options are Default, Fast, and Slow.
C-State POPDOWN (Available when CPU C State Report is Enabled)
When set to disabled, this feature prevents automatic return to a previous C3 or
C4 state. The options are Enabled and Disabled.
C-State POPUP (Available when CPU C State Report is Enabled)
When set to enabled, this feature will move the system from a C3/C4 state to a C2
state (upon bus master request) and automatically enable bus masters. The options
are Disabled and Enabled.
IDE/SATA Conguration
When this submenu is selected, the AMI BIOS automatically detects the presence
of the SATA Devices and displays the following items:
SATA Controllers
This item enables or disables the on board SATA controller. The options are En-
abled and Disabled:
SATA Mode Selection
This item selects the mode for the installed drives. The options are IDE and AHCI.
The following are displayed depending on your selection:
IDE Mode
No additional items are displayed when IDE Mode is selected:
AHCI Mode
The following items are displayed when AHCI Mode is selected:
Port 0, Port 1 Speed Limit
Use this option to set the speed limit for the selected port. The options
are No Limit, GEN1 Rate and GEN2 Rate.
To Next Page
Loading...
Need help?
General
