Supmeter BST100-B11 - F1-SET Parameters

35
Main Menu
Second Menu
Description
≡F4-CLS≡
Data Clearing
---CLS--
Clear Screen: Clear Totalized Weight and Totalized Weight Pulse Count.
But Totalized Weight of Current Shift will not be cleared, so this operation
has no effect on recording of weight per shift.
---CLt--
Clear Weight: Clear Totalized Weight, Totalized Weight Pulse Count and
Totalized Weight of Current Shift.
The cleared value of Totalized Weight of Current Shift will not be recorded.
---CLr--
Clear Records: Clear History Records of Totalized Weight.
But Current Totalized Weight, Totalized Weight Pulse Count and Totalized
Weight of Current Shift will not be cleared.
≡F5-SAF≡
Security
--ALoc--
Auto-locking: If there is not any keypad operation in one minute and it‟s not
in the processes of „F2 Calibration‟ & „F6 Factory Adj.‟, the controller will
lock the keypad and return to „Main Display Interface‟ automatically.
--Locc--
Locking keypad.
--oPEn--
Unlocking keypad.
--PASS--
Set Password.
Exfactory Password: 001.
--dEFU--
RAM Reset: Restore to factory defaults.
≡F6-FAC≡
Factory Adj.
--Ao1E--
AO1 Zero Adjustment.
--Ao1F--
AO1 Full Range Adjustment.
--Ao2E--
AO2 Zero Adjustment.
--Ao2F--
AO2 Full Range Adjustment.
--Ao3E--
AO3 Zero Adjustment.
--Ao3F--
AO3 Full Range Adjustment.
--AI1E--
AI Zero Adjustment.
--AI1F--
AI Full Range Adjustment.
≡F7-InF≡
Product Info.
---VEr--
Version No.: Only for query.
---Sn---
Serial No.: Only for query.
--dAtE--
Exfactory Date: Only for query.
--AudIt-
Audit Counter: Audit Trail Counter [0~99999999] for Scale parameter‟s
modification. Only for query.
--AutH--
Authorization Code: Only for query.
www.zemicusa.info