Supmeter BST100-B11 - Segmenting Span Correction (Segc)

55
6.4.5 Segmenting Span Correction (SEgC)
After doing Dynamic or Static Span Calibration, further corrections for 3 [AD Value: 0~60000] linear
segments are optional for correcting Correction Coefficient 1~3.
Main Display Interface
【MENU】+【▲】【 ▼】: ≡F2-CAL≡
【ENT】+【▲】【 ▼】: --SEgC--
【ENT】
M
AD Value Linear Segment: 1~3; SEG1:0~[P119]; SEG2:
[P119]~[P120]; SEG3: [P120]~ Max. AD Value
【ENT】& Start loading
RUN
AUTO
EXT
ALARM
kg
t
t/h
kg/m
Stop loading & Press【ENT】to run the last revolution:
Totalized Weight; Revolution Count & Remainder length of a
revolution (【▲】【 ▼】: Display Flow or AD value)
RUN
AUTO
EXT
ALARM
kg
t
t/h
kg/m
After running the last revolution
AUTO
EXT
ALARM
kg
t
t/h
kg/m
RUN
≡: Running the last revolution
www.zemicusa.info