SureTouch Refrigerated Liquid Dispensers • SureShot Technical Assistance Center: 1-888-777-9990 or 902-865-9602
12
CLEANING AND MAINTENANCE
Tanks must be washed and sanitized prior to first use. Use a good quality cleaner
and a sanitizing agent approved by your organization according to its specifications.
Do not use any abrasive material or cleaners on the dispenser.
Dispenser must not be cleaned by water jet.
Do not spray any liquid or cleaners in or around the valve area. Liquid could damage
electrical components behind the valve.
Recommended Cleaning Schedule
Exterior and Splash Panel
Every time a new product bag,
bag-in-box or tank is loaded
Every time valve is cleaned or
more frequently as required
Every time tank is removed from
dispenser
Once per month or more frequently
as required
Exterior and Splash Panel
1. Clean exterior surfaces using a soft cloth dampened with warm, clean, soapy water.
2. Rinse using a soft cloth dampened with warm, clean water.
3. Wipe dry with a soft cloth to prevent water spotting.
4. A stainless steel cleaner is recommended. Spray cleaner on the cloth and then use
cloth to wipe exterior. Use on stainless steel surfaces only.
Note: Do not allow stainless steel cleaner to come in contact with the valve, button
panel or any plastic parts.
Button Panel
1. Press and hold the Panel Disable button (optional) until you hear a beep and lights
on the button panel flash in sequence.
2. Clean the panel using a soft cloth dampened with warm, clean, soapy water.
3. Rinse using a soft cloth dampened with warm, clean water.
4. Dry thoroughly with a soft cloth.
5. Button panel will automatically enable and return to normal operating mode after
several seconds (up to 30).
To Next Page
Loading...
Need help?
General
