EasyManuals Logo

SureShot SureTouch intellishot User Manual

SureShot SureTouch intellishot
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
SureTouch Refrigerated Liquid Dispensers SureShot Technical Assistance Center: 1-888-777-9990 or 902-865-9602
13
Catch Tray and Screen
1. Remove the catch tray and screen by lifting up and off, if applicable.
2. Rinse thoroughly with warm, clean water.
3. Wash in hot water (minimum 140 °F/60 °C) with a good quality cleaner. Wash
thoroughly to reach all corners and crevices.
If a dishwasher is available, the items may be cleaned on the full wash cycle.
4. Rinse well with warm, clean water.
5. Air dry thoroughly.
6. Replace catch tray and screen.
Valve Area
The area around the product delivery valve must be kept clean for proper sanitation and
to maintain accurate portion amounts.
1. Open the product compartment door.
2. Thoroughly clean the area around the valve using a soft cloth dampened with warm,
clean, soapy water or a sanitized wipe.
3. Rinse using a soft cloth dampened with warm, clean water.
4. Dry thoroughly with a soft cloth.
5. Close product compartment door.
Product Compartment
Cleaning and drying the product compartment each time a new bag, bag-in-box or tank is
loaded will remove condensation and therefore improve efficiency of the dispenser.
Ice may form inside the product compartment. It is recommended that ice be removed
prior to cleaning the compartment with a wet cloth.
Note: Ice in the product compartment does not necessarily mean the temperature of the
product is too cold.
1. Remove ice from the product compartment.
a. Turn the dispenser OFF.
b. Follow instructions to Remove an Empty Product Bag, Bag-In-Box or Tank on
page 7.
c. Wipe with a dry cloth to remove loose ice.
d. With product compartment door open, wait approximately fifteen (15) minutes for
ice to soften.
e. Wipe to remove and discard the ice.
2. Clean inside product compartment using a soft cloth dampened with warm, clean,
soapy water.
3. Rinse well with warm, clean water.
4. Dry thoroughly with a soft cloth.
Product Case
1. Remove the product case with empty product bag from the product compartment.
2. Remove bag from product case.
3. Rinse thoroughly with warm, clean water.
4. Wash in hot water (minimum 140 °F/60 °C) with a good quality cleaner. Wash
thoroughly to reach all corners and crevices.
5. Rinse well with warm, clean water.
6. Dry thoroughly with a soft cloth or air dry.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SureShot SureTouch intellishot and is the answer not in the manual?

SureShot SureTouch intellishot Specifications

General IconGeneral
BrandSureShot
ModelSureTouch intellishot
CategoryDispenser
LanguageEnglish

Related product manuals