Suzuki AN400 - Page 21

Engine Mechanical: 1D-1
Engine
Engine Mechanical
Schematic and Routing Diagram
Throttle Cable Routing Diagram (AN400/A/ZAK9)
B905H11402003
“a”
“D”
8
7
“C”
9
Upside
Inside
4
5
6
3
4
4
“A”
2
5
1
3
“B”
4
4
5
3
Upside
Inside
I905H1140001-02
1. Clamp
: Bind the parking brake cable, starter motor lead wire and seat-
lock cable with the clamp.
8. Throttle cable No. 2
2. Clamp
: Bind the parking brake cable and starter motor lead wire with the
clamp.
9. Clamp
: Clamp the throttle cable at white taping point.
3. Seat-lock cable “A”: Pass the parking brake cable into the guide.
4. Parking brake cable “B”: Pass the parking brake cable inside of the brake hose.
5. Starter motor lead wire “C”: Pass the parking brake cable under the brake pipe. Do not slacken the
parking brake cable.
6. Brake pipe “D”: Pass the throttle cable No. 2 over the throttle cable No. 1. Pass the
throttle cables inside of the wiring harness.
7. Throttle cable No. 1 “a”: 0 mm (0 in)