1D-2 Engine Mechanical:
Repair Instructions
Engine Bottom Side Assembly (AN400/A/ZAK9)
B905H11406036
For engine bottom side assembly other than the
following, refer to “Engine Bottom Side Assembly” in
related manual.
Crankcase
• Install the O-rings (1) and (2).
• Install the dowel pins.
CAUTION
!
Replace the O-rings with the new ones.
• Install the oil breather separator (3) to the left
crankcase.
• Clean and degrees the crankcase mating surfaces
(both surfaces) with a cleaning solvent.
• Apply bond to the right crankcase and part “a” of the
left crankcase.
: Sealant 99000–31140 (SUZUKI BOND
No.1207B or equivalent)
CAUTION
!
• Coat the sealant evenly without break.
• Application of sealant must be performed
within a short period of time.
• Take extreme care not to let sealant enter
into the oil passages or bearings.
1
2
I705H1140118-04
3
I905H1140003-01
“a”
“a”
I905H1140002-01
To Next Page
Loading...
