Engine Mechanical: 1D-3
• Tighten the crankcase bolts to the specified torque.
Tightening torque
Crankcase bolt (M6): 11 N·m (1.1 kgf-m, 8.0 lbf-ft)
Crankcase bolt (M8): 22 N·m (2.2 kgf-m, 16.0 lbf-
ft)
CAUTION
!
Tighten the larger diameter crankcase bolts
first and then smaller ones diagonally and
evenly.
NOTE
After crankcase bolts have been tightened,
check it crankshaft rotate smoothly.
Specifications
Tightening Torque Specifications
B905H11407002
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List” in Section 0C in
related manual.
Special Tools and Equipment
Recommended Service Material
B905H11408001
I705H1140102-01
I705H1140101-01
Fastening part
Tightening torque
Note
N⋅m kgf-m lbf-ft
Crankcase bolt (M6) 11 1.1 8.0 )(Page 1D-3)
Crankcase bolt (M8) 22 2.2 16.0 )(Page 1D-3)
Material SUZUKI recommended product or Specification Note
Sealant SUZUKI BOND No.1207B or
equivalent
P/No.: 99000–31140 )(Page 1D-2)
To Next Page
Loading...
