4A-2 Brake Control System and Diagnosis:
Rear Brake Hose Routing Diagram (AN400A/ZAK9)
B905H14102004
1
“A”
1
2
1
2
3
1
“A”
2
4
“B”
2
“C”
“b”
“a”
(a)
I905H1410003-01
1. Rear brake pipe No. 2 “B”: Fix the brake hose to its hose clamp.
2. Rear brake hose No. 2 “C”: After positioning the clamp with the stopper on the swingarm,
tighten the clamp bolt.
3. E-ring : 23 N⋅m (2.3 kgf-m, 16.5 lbf-ft)
4. Stopper
: After the brake hose union has contacted the stopper, tighten the
union bolt.
“a”: 28 °
“A”: Clamp the brake pipe at white marking point. “b”: 14 °
To Next Page
Loading...
