3-98 ENGINE
• Pull the cam chains upward and install the cam chain tension-
ers into each cylinder head.
1 For No.1 (Front) cylinder head
2 For No.2 (Rear) cylinder head
NOTE:
* When installing the cam chain tensioners, insert the their
holder ends
A into each guide cast on the cylinder.
* When installing the No.1 (Front) cam chain tensioner, through
it rear side of the rib
B.
• Tighten the cam chain tensioner mounting bolts to the speci-
fied torque.
$ Cam chain tensioner mounting bolt:
10 N·m (1.0 kgf-m, 7.0 lb-ft)
FRONT
No. 1 (Front) cylinder
FRONT
No. 2 (Rear) cylinder
FRONT (No. 1)
REAR (No. 2)
To Next Page
Loading...
