Suzuki DL1000 - Throttle Body Removal

4-60 FI SYSTEM
THROTTLE BODY REMOVAL
• Remove the fuel tank. (#4-52)
• Loosen the respective throttle body clamp screws (air cleaner
side).
• Disconnect the *PAIR solenoid valve lead wire coupler, IAP
senor coupler and IAT sensor coupler.
• Disconnect the PAIR hoses from the PAIR solenoid valve.
• Remove the air cleaner box.
* For USA model is operated by the vacuum.
• Loosen the respective throttle body clamp screws (intake pipe
side).
• Disconnect the various lead wire couplers.
1 STP sensor
2 TP sensor/Fuel injector
3 STVA motor