6-70 CHASSIS
• Remove the slide pin
4.
• Place a rag over the piston to prevent it from popping out and
then force out the piston using compressed air.
"
• Remove the dust seal
5 and piston seal
6.
"
CALIPER INSPECTION
BRAKE CALIPER
Inspect the brake caliper cylinder wall for nicks, scratches and
other damage. If any damage is found, replace the caliper with a
new one.
BRAKE CALIPER PISTON
Inspect the brake caliper piston surface for any scratches and
other damage. If any damage is found, replace the caliper piston
with a new one.
Do not use high pressure air to prevent piston dam-
age.
Do not reuse the dust seal and piston seal to prevent
fluid leakage.
To Next Page
Loading...
