CHASSIS 6-63
MASTER CYLINDER REMOVAL AND DISAS-
SEMBLY
• Remove the rear view mirror and brake lever cover.
• Drain the brake fluid. (!6-58)
• Disconnect the front brake light switch coupler
1.
• Place a rag underneath the union bolt on the master cylinder
to catch any spilt brake fluid. Remove the brake hose union
bolt and disconnect the brake hose.
"
• Remove the master cylinder.
• Remove the brake lever
2 and brake switch
3.
• Pull out the dust boot
4 and remove the snap ring
5.
Immediately and completely wipe off any brake fluid
contacting any part of the motorcycle. The fluid reacts
chemically with paint, plastics and rubber materials,
etc. and will damage them severely.
To Next Page
Loading...
