Suzuki DL1000 - Fuel Mesh Filter Inspection and Cleaning; Fuel Pump and Fuel Mesh Filter Installation

FI SYSTEM 4-57
FUEL MESH FILTER INSPECTION AND
CLEANING
If the fuel mesh filter is clogged with sediment or rust, fuel will
not flow smoothly and loss in engine power may result.
Blow the fuel mesh filter with compressed air.
NOTE:
If the fuel mesh filter is clogged with many sediment or rust,
replace the fuel filter cartridge with a new one.
FUEL PUMP AND FUEL MESH FILTER
INSTALLATION
Install the fuel pump and fuel mesh filter in the reverse order of
removal, and pay attention to the following points:
• Install the new O-rings to the fuel pressure regulator and fuel
pipe.
• Apply thin coat of the engine oil to the O-rings.
"
• Tighten the screws together with the lead wire terminals.
• Tighten the nuts together with the lead wire terminals.
A...... + terminal for fuel pump
B...... + terminal for fuel level gauge
C...... - terminal for fuel level gauge
• Install the fuel level gauge.
Use the new O-rings to prevent fuel leakage.