Suzuki DL1000 - Removal

CHASSIS 6-25
REMOVAL
HANDLEBARS
• Remove the handlebar balancer
1.
• Remove the brake/clutch lever covers
2.
NOTE:
Do not remove the handlebar balancer mounting screw before
removing the handlebar balancer. Slightly loosen the mounting
screw, and then pull the balancer assembly out of handlebars.
• Remove the rear view mirror
3.
• Disconnect the front brake light switch coupler
4.
• Remove the front brake master cylinder.
• Remove the right handlebar switch box
5 and throttle case
6.
• Disconnect the clutch switch lead wires
7.
• Remove the left handlebar switch box
8.
• Remove the rear view mirror
9.
• Remove the clutch master cylinder.