CHASSIS 6-67
BRAKE PAD REPLACEMENT
• Remove the plug
1.
• Loosen the pad mounting pin
2.
• Remove the caliper bracket bolt
3.
"
• Remove the pad mounting pin and brake pads with the rear
caliper pivoted up.
• Clean up the caliper especially around the caliper pistons.
• Assemble the new brake pad
4, insulator
5 and shim
6.
"
• Install the new brake pads.
* Do not operate the brake pedal while dismounting
the pads.
* Replace the brake pads as a set, otherwise braking
performance will be adversely affected.
Replace the brake pads as a set, otherwise braking
performance will be adversely affected.
To Next Page
Loading...
