3-34 ENGINE
ENGINE COMPONENTS INSPECTION AND SERVICING
CYLINDER HEAD COVER
DISASSEMBLY
#
• Remove the camshaft position sensor
1.
• Remove the PAIR reed valve cover
2.
INSPECTION
• Inspect the PAIR reed valve for the carbon deposit.
• If the carbon deposit is found in the reed valve, replace it with
a new one.
REASSEMBLY
• Apply SUZUKI SUPER GREASE “A” to the O-ring and install
it.
' 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “B” (Others)
• Apply THREAD LOCK “1342” to the thread and install the
PAIR reed valve cover.
% 99000-32050: THREAD LOCK “1342”
Be sure to identify each removed part as to its loca-
tion, and lay the parts out in groups designated as
“No.1”, “No.2” “Exhaust”, “Intake”, so that each will
be restored to the original location during assembly.
To Next Page
Loading...
