ENGINE 3-33
• Separator the crankcase into 2 parts, right and left with the
crankcase separating tool.
" 09920-13120: Crankcase separating tool
NOTE:
* Fit the crankcase separating tool, so that the tool arms are in
parallel with the side of crankcase.
* The crankshaft and transmission components should remain
in the left crankcase half.
* When separating the crankcase, tap the end of the counter-
shaft with a plastic hammer.
• Remove the gearshift fork shafts, gearshift forks and gearshift
cam.
• Remove the countershaft and driveshaft.
• Remove the crankshaft.
To Next Page
Loading...
