Suzuki DL1000 - Page 250

5-14 COOLING AND LUBRICATION SYSTEM
• Remove the bearing using the special tool.
& 09921-20240: Bearing remover set
NOTE:
If there is no abnormal noise, bearing removal is not necessary.
!
• Remove the mechanical seal using the special tool.
& 09921-20240: Bearing remover set
NOTE:
If there is no abnormal condition, the mechanical seal removal is
not necessary.
!
• Remove the oil seal using a suitable bar.
NOTE:
If there is no abnormal condition, the oil seal removal is not nec-
essary.
!
The removed bearing must be replaced with a new
one.
The removed mechanical seal must be replaced with a
new one.
The removed oil seal must be replaced with a new one.