PERIODIC MAINTENANCE 2-23
BRAKE PEDAL HEIGHT
• Loosen the locknut
1 and rotate the push rod
2 to locate
brake pedal 20 – 30 mm (0.8 – 1.2 in)
A below the top face of
the footrest.
• Retighten the locknut
1 to secure the push rod
2 in the
proper position.
% Brake pedal height
A: 20 – 30 mm (0.8 – 1.2 in)
& Rear brake master cylinder rod locknut
1:
18 N·m (1.8 kgf-m, 13.0 lb-ft)
BRAKE LIGHT SWITCH
Adjust the rear brake light switch so that the brake light will
come on just before pressure is felt when the brake pedal is
depressed.
To Next Page
Loading...
