3-24 ENGINE
• Remove the cylinder head bolts and cam chain tensioner
mounting bolt.
• Remove the cam chain tensioner.
• Remove the cylinder head nuts
1.
• Remove the cylinder head nut
2.
• Loosen the cylinder nuts
3.
• Remove the cylinder head bolts.
• Remove the cylinder head.
NOTE:
* When loosening the cylinder head bolts, loosen each bolt little
by little diagonally.
* To identify each cylinder head, mark the cylinder as the Front
and Rear.
REAR CYLINDER
• Remove the rear cylinder.
NOTE:
Firmly grip the cylinder at both ends, and lift it straight up. If the
cylinder does not come off, lightly tap on the finless portions of
the cylinder with a plastic mallet to make the gasketed joint
loose.
To Next Page
Loading...
