Suzuki DR-Z125L - Page 48

3-12 ENGINE
CLUTCH COVER
• Remove the clutch cover.
CLUTCH
• While holding the generator rotor nut, remove the clutch
spring mounting bolts in a crisscross pattern, and remove the
clutch springs and clutch pressure plate
1.
• Remove the clutch drive and driven plates.
• Remove the washer
2, bearing 3, clutch push piece 4 and
clutch push rod
5.
• Flatten the lock washer, and remove the clutch sleeve hub nut
with the special tool.
& 09920-53740: Clutch sleeve hub holder
• Remove the clutch sleeve hub.