Suzuki DR-Z125L - Page 49

ENGINE 3-13
• Remove the washer and primary driven gear assembly
1.
• Remove the spacer
2 and washer.
GEARSHIFT
• Remove the kick starter drive gear
3 and waher.
• Remove the gearshift shaft
4.
• Remove the pawl lifter
5 and cam guide 6.
• Remove the gearshift cam driven gear
7.
NOTE:
When removing the cam driven gear
7, do not lose the pawls
8, pins 9 and springs 0.
OIL PUMP
• Remove the circlip
A and oil pump driven gear B.