Swann AMI Codes-II - Maintenance (Main Menu 3)

AMI Codes-II
Program Overview
A-96.250.571 / 050517 71
8.3. Maintenance (Main Menu 3)
Front End
Operating Time Years / Days / Hours / Minutes / Seconds 2.1.5.1*
2.1.5*
Sensors Photometer Current Value
2.2* 2.2.1* (Raw value)
Absorbance
Cal. History Number 2.2.1.4.1*
2.2.1.4* Date, Time
Slope
Ver. History Number 2.2.1.5.1*
2.2.1.5* Date, Time
Absorbance
Reference value
pH Electrode Current Value
2.2.2* (Raw value)
Cal. History Number 2.2.2.5.1*
2.2.2.5* Date, Time
Offset
Slope
Miscellaneous Case Temp. 2.2.3.1*
2.2.3*
Sample Sample ID 2.3.1*
2.3* Sample Flow / (Raw value)
Temperature / (Nt5k)
I/O State Alarm Relay 2.4.1*
2.4* Relay 1/2 2.4.2*
Input
Signal Output 1/2
Interface Protocol 2.5.1* (only with RS485
2.5* Baud rate interface)
Calibration Process DIS Current Value * Menu numbers
3.1* 3.1.1* Slope
Process Value 3.1.1.4*
Process pH Current Value