Swann AMI Codes-II - Operation (Main Menu 4)

72 A-96.250.571 / 050517
AMI Codes-II
Program Overview
8.4. Operation (Main Menu 4)
3.1.2* Offset
Process Value 3.1.2.4*
Standard pH (Progress) 3.1.3.5*
3.1.3*
Service Verification (Progress) 3.2.1.1*
3.2* 3.2.1*
Fill System (Progress) 3.2.2.5*
3.2.2*
Simulation Alarm Relay 3.3.1*
3.3* Relay 1 3.3.2*
Relay 2 3.3.3*
Signal Output 1 3.3.4*
Signal Output 2 3.3.5*
Set Time (Date), (Time)
3.4*
Cleaning Parameter Mode 3.5.1.1*
3.5* 3.5.1* Start time / Calendar 3.5.1.xx*
Delay 3.5.1.3*
Signal Outputs 3.5.1.4*
Output/Control 3.5.1.5*
Fill Channel 11 (Progress) 3.5.2.5*
3.5.2*
Fill Channel 12 (Progress) 3.5.3.5*
3.5.3*
Sensors Filter Time Const. 4.1.1*
4.1* Hold after Cal. 4.1.2*
Meas. Interval 4.1.3*
Default pH 4.1.4*
Relay Contacts Alarm Relay Alarm DIS Alarm High 4.2.1.1.1*
4.2* 4.2.1* 4.2.1.1* Alarm Low 4.2.1.1.26*
Hysteresis 4.2.1.1.36*
Delay 4.2.1.1.46*
Alarm pH Alarm High 4.2.1.2.1*