Sym Citycom 300i Service Manual

13. Body Cover
13-14
Rear Body Cover
Remove
Loosen Each side 2 screws from rear end of floor
panel.
Loosen 2 bolts from rear fender.
Disconnect the tail light coupler.
Remove the body cover.
Installation
Install in reverse order of removal procedures.
Tail light coupler
E
ach side 2 screws
2 bolts
To this chapter contents
floor panel

Sym Citycom 300i Specifications

General

Engine Type	4-stroke, Single Cylinder
Displacement	278.3 cc
Fuel System	Electronic Fuel Injection
Cooling System	Liquid Cooled
Front Suspension	Telescopic Fork
Rear Suspension	Dual Shock Absorbers
Front Tire	110/70-16
Rear Tire	140/70-16
Seat Height	800 mm
Transmission	CVT
Front Brake	Disc
Rear Brake	Disc
Fuel Capacity	10 liters