9
. Final Drive Mechanism
9-5
Bearing Replacement
Left crankcase side
If the drive shaft is pulled out with its bearing, then
remove the bearing with bearing puller and shaft
protector.
Special tool:
Multi-functional bearing puller or Outer bearing
puller SYM-6204001
Shaft protector SYM-6204010
Remove final shaft bearing and counter shaft
bearing from left crankcase using following tools.
Special tool:
Inner bearing puller SYM-620422
Caution
Never install used bearings. Once bearing
removed, it has to be replaced with new one.
Install new final shaft bearing and counter shaft
bearing into left crankcase.
Special tool:
Bearing driver SYM-6204024
Bearing driver HK1516 SYM-9100200-HK1516
Install new drive shaft bearing and bearing puller
onto left crankcase.
Special tool:
Bearing puller 6205 SYM-9100400-6205
Outer bearing puller
Inner bearing
puller
Bearing driver
Bearing puller 6205
To this chapter contents
To Next Page
Loading...
