11. Crankcase / Crankshaft
11-3
Disassembly of Crankcase
Remove the cam chain tensioner (hex socket bolt)
from the left side of crankcase.
Remove the connection bolts (2 bolts) of the
right-side crankcase.
Remove the right-side crankcase.
Slightly shake the crankshaft and then remove it
and the chain.
Remove the gasket and the 2 dowel pins.
Scrape gasket residues off the crankcase contact
surface.
Caution
z Do not damage contact surface of the
crankcase.
z Soap the gasket residues into solvent and the
residues will be removed easily.
螺栓
×2
To this chapter contents
To Next Page
Loading...
