14. Steering / Front Wheel / Front Cushion
14-10
Front Cushion
Removal
Remove the front fender, front lower spoiler, front
cover, and front wheel as well as front brake
components.
Remove the brake fluid hose clipper or cable
guide on the left cushion. (1 bolt)
As for disc brake, remove the cable guide on the
right cushion. (1 bolt)
Remove the top connection bolt of the right
cushion. (4 bolts)
Remove the cushion from the front fork.
Installation
Install the cushions according to the reverse
procedure of removal.
Align the cushion top-edge with the top-end level
of the front fork when installing the front cushion
onto the front fork. Then, tighten the nut.
Torque value: 2.4~3.0kgf-m
Front Fork / Steering Column
Removal
Firstly, remove the handle, front wheel, front brake
set, and front cushions.
Remove the steering column nut.
Remove the top cone ring, and then remove the
steering column.
Caution
z Place the steering column bearing balls into a
parts container to avoid to missing or
shortage.
Brake fluid
hose clipper
Cable guide
Disc brake
Bolts
Drum brake
Steering column nut
Top cone race
To this chapter contents
To Next Page
Loading...
