18. Electrical System
18-16
Taillight / brake light / rear winker
replacement
Remove the seat / luggage box.
(Refer to chapter 14)
Remove the seat open solenoid valve
assembly (2 bolts).
Rotate the brake light bulb and remove it.
Replace the brake light bulb if necessary.
Rotate the rear winker bulb and remove it.
Replace the winker bulb if necessary.
Specification：
Taillight / brake light 12V 5W / 21W
Winker bulb 12V 21W
Installation
Install in the reverse order of removal.
Winker bulb
Taillight / brake light bulb
2 bolts
To this chapter contents
To Next Page
Loading...
