5. Fuel Injection System
5-12
Diagnosis of Idle Speed Misfire
Does the by-pass valve
operate or out of order?
Connect the Data Scan
and enter into CO
adjustment at idle menu.
Positive value is for
enrichment, and negative
value is for lean.
If the idle speed misfire
problem still can not be solved
after check above related EFI
components item by item,
then check if the other
traditional components on the
engine is in abnormal.
Replace with
new one for
confirmation
Idle speed misfire
1. Connect the Data Scan
and check trouble content
2. Troubleshooting
according to the
troubleshooting
procedure.
Is fuel enough?
Are the battery wires
loose?
Is the vacuum pipe
leaking?
Does the throttle cable
stuck so could not be
set-up?
Is the CO value in idle
speed out of set up range?
(0.5%~3.0%)
Does the carbon
deposited onto the throttle
body?
To this chapter contents
To Next Page
Loading...
Need help?
General
