Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 - Page 394

Deployment Solution 394
Command-Line Switches
EncryptedClientID Specifies the encrypted client ID.
Example: EncryptedClientID=0
Password Specifies the password.
Example: Password=Altiris
AllowMod Specifies whether or not to enable or disable security
for admin properties. If the value is 0, the security is
disabled. if the value is 1, the security is enabled.
Example: AllowMod=1
Transport
TransportUse Specifies how AClient will find and connect to a
Deployment Server. To use TCP/IP multicast,
TransportUse=0. To use TCP/IP, TransPortUse=1.
Example: TransportUse=0 or TransPortUse=1.
MCastAddr Specifies the multicast group address to use to locate
a Deployment Server. TransportUse must be 0 for this
setting to work.
Example: MCastAddr=225.1.2.3.
MCastPort Specifies the multicast port to use to locate a
Deployment Server. TransportUse must be 0 for this
setting to work.
Example: MCastPort=402.
TTL Specifies the Multicast Time to Live to use to locate a
Deployment Server. TransportUse must be 0 for this
setting to work.
Example: TTL=32.
ConsoleName Specifies the server name to use to locate a
Deployment Server via Multicast. If nothing is
specified, AClient will connect to the first Deployment
Server it locates. TransportUse must be 0 for this
setting to work. This is optional.
Example: ConsoleName=ALTIRIS.
TcpAddr Specifies the IP Address or Host Name to use to locate
a Deployment Server.TransportUse must be 1 for this
setting to work.
Example: TcpAddr=172.19.16.20
TcpPort Specifies the IP port to use to locate a Deployment
Server. TransportUse must be 1 for this setting to
work.
Example: TcpPort=402.
User Prompts
Parameters Details