11 - 36 Symbol LS9203/LS9203i Product Reference Guide
Setup Field(s)
Table 11-1
Setup Field(s) Definitions
Parameter Description Page
Move Cursor
Move Cursor To a Character Scan
Move Cursor To Character
, then any printable ASCII character from
the
Alphanumeric Keyboard on page 11-169
. This moves the cursor to the
position after the matching character. If the character is not there, the rule
fails and ADF tries the next rule.
11-37
Move Cursor to Start of Data Scan this bar code to move cursor to the beginning of the data.
11-37
Move Cursor Past a Character This action moves the cursor past all sequential occurrences of a selected
character. For example, if the selected character is ‘A’, then the cursor
moves past ‘A’, ‘AA’, ‘AAA’, etc. Scan
Move Cursor Past Character
, then
select a character from the
Alphanumeric Keyboard on page 11-169
. If the
character is not there, the cursor does not move (i.e., has no effect).
11-37
Move Cursor Past a Specific
String
This action moves the cursor past the first occurrence of a selected string.
Scan
Move Cursor Past Specific String
, then select the character(s) (up to
10) using the
Alphanumeric Keyboard
. Scan the
End Of Message bar
code on page 11-190
.
11-37
Move Cursor to Specific String
and Replace
This action moves the cursor to the first occurrence of a selected string and
replaces the string with another user-defined string. Scan
Move Cursor to
Specific String and Replace
, then enter an alphanumeric string
representing the character(s) (up to 10) to match and delete using the
Alphanumeric Keyboard
. Scan the
End Of Message bar code on page
11-190
. Enter another alphanumeric string representing the character(s)
(up to 10) to insert using the
Alphanumeric Keyboard
. Scan
End Of
Message
.
11-38
Move Cursor to Last Occurrence
of String and Replace All
This action replaces all occurrences of a selected string with another
user-defined string, and moves the cursor to the beginning of the last
occurrence. Scan
Move Cursor to Last Occurrence of String and Replace
All
, then enter an alphanumeric string representing the character(s) (up to
10) to match and delete using the
Alphanumeric Keyboard
. Scan the
End
Of Message bar code on page 11-190
. Enter another alphanumeric string
representing the character(s) (up to 10) to insert using the
Alphanumeric
Keyboard
. Scan
End Of Message
.
11-38
Skip to End Scan
Skip to End
to move cursor to the end of the data.
11-38
Skip Ahead “N” Characters Scan one of these bar codes to select the number of positions ahead to
move the cursor.
11-39
Skip Back “N” Characters Scan one of these bar codes to select the number of positions back to move
the cursor.
11-42
Send Preset Value Send Values 1 through 6 by scanning the appropriate bar code. Set these
values using the prefix/suffix values in
Table 6-4 on page 6-37
.
Value 1 = Scan Suffix; Value 2 = Scan Prefix
Value 6 = FN1 Substitution Value
11-45
To Next Page
Loading...
