User Preferences 4 - 11
Time Delay to Low Power Mode
The scanner (after a period of inactivity) goes into low power mode and blinks infrequently to save power.
This parameter sets the time that the scanner remains active after any scanning activity. Scan one of the five
options. Depending on the selection, the scanner enters a low power mode 15, 30, 60, 90 minutes or 127.5 hours
(Extended) after the last attempted decode. To restore the scanner to full power mode, the user must simply use
the scanner by presenting a barcode.
15 Minutes
*30 Minutes
To Next Page
Loading...
