TA Instruments TGA 2950 - Page 27

TA I NSTRUMENTS TGA 2950 1–7
The 2950 Instrument
∆
Table 1.1
TGA 2950 Keypad
Function Keys
(continued)
Key/Function Explanation
LOAD Loads a sample pan from
the sample platform onto the
balance.
UNLOAD Unloads the sample pan
from the balance onto the
sample platform.
∆
FURNACE Toggles between the
furnace closed (up) and
furnace open (down)
functions, depending on
where the furnace is
when you press the key.
This key can be pressed
while the furnace is
moving to reverse the
direction of movement.
START Begins the experiment. This
is the same function as Start
on the controller.
Forced Start can be done by
pressing the START key
while the status line displays
“Set Up.” Forced start
begins collecting data
during instrument setup.
(table continued)