Taie FU series - 8 Operation Levels; Levels Diagram; Lock Function

24
8. Operation levels
8.1 Levels diagram
8.2 Lock function
To use lock function, please set parameter “LCK” in level 2.
Levels entering available LCK
Level 1
(User)
Level 2
(PID)
Level 3
(Input)
Level 4
(SET)
Parameters which can be
changed
◎ ◎ ◎ ------ All parameters
(Factory set value)
◎ ◎ ------ ◎ All parameters
◎ ◎ ------ ------ All parameters except level 3
◎ ◎ ------ ------ Parameters in level 1
◎ ◎ ------ ------ “SV” and “LCK”
◎ ◎ ------ ------ Only “LCK”