Taie FU series - Alarm Mode Selection

37
11. Alarm
11.1 Alarm time (ALT1/ALT2/ALT3)
ALT1=0 Flicker alarm
ALT1=99.59 Continued alarm
ALT1=00.01 ~ 99.58 Alarm on delay time
11.2 SETA
*SETA is in Level 3 (Input level)
If SETA_1=1
，
AL1 relay will be action reversely
If SETA_4=0
，
program run alarm
If SETA_4=1
，
program end alarm
When "b" contact
(normal close) is
needed
}
Only available for
programmable controller
If SETA_2=1
，
AL2 relay will be action reversely
If SETA_3=1
，
AL3 relay will be action reversely
}