CONTROLS
Accessories
Radio (Cab Type)
Operating precautions
•
To
ensure safe operation of the machine, always be sure
to
keep the volume
of
the radio
down
to
a level where you can easily hear sounds from outside the machine.
• Do not keep the radio playing for long periods of time with the engine stopped. Doing so
will drain the battery
of
its charge and make it difficult or impossible
to
restart the engine.
• Be careful not
to
allow water or other liquids
to
come into contact with the radio. Doing so
may result
in
it being rendered inoperable.
Names
of the components
TONE
L
OW
ST AUX =
FMO
r1MJJ
En')(~
MWG
[Ja[JJJ
B
~
(1)
POWER button
Use this button
to
turn on and off the radio.
(2)
TONE
control button
Use this button
to
select the tone. Press
the button to select low tone. The TONE
LOW display appears on the LCD. Press the
button again
to
select high tone.
(3)
LCD
Displays the time/receiving frequency and
the operation mode.
(4)
CLOCK
button
Use this button
to
switch between the clock
display and the receiving frequency display
68
AUOC001
on the LCD. If this button
is
not pressed for
six seconds while the frequency is displayed,
the LCD returns
to
the clock display.
(5)
AST button
Use this button
to
automatically seek the
station information, store it into memory
and assign each preset button
(1
to
6)
to
a
station.
(6)
PRESET STATION buttons
(1
to
6)
Use these buttons
to
store station information.
Each button can store information on one FM
station and one AM station. For how
to
use
these buttons, refer
to
"Presetting stations."
To Next Page
Loading...
Need help?
General
