OPERATION
Operating Procedures
Braking
when
traveling
down
slopes
Braking
is
automatically applied by the
hydrostatic drive system when the left control
lever is returned to the neutral position.
Full
braking is achieved when the safety bar is
raised.
If
the
engine stops
Descending
T7D035E
If the engine stops when traveling down a
slope, set the control levers and pedal to the
neutral position, stop the machine and re-
start the engine.
91
Do
not open the front
door
while traveling
on slopes (if equipped)
T7D036
Opening the front door while traveling
on
slopes can be hazardous, because the force
required to open and close the door changes
abruptly. Always keep the door closed when
traveling
on
slopes.
To Next Page
Loading...
Need help?
General
