Talkpod A36plus MAX - Page 33

24
36
Menu Description
If the transmitting device activates the tail tone elimination feature, the receiver
will hear a simulated GSTAR signal beep. If this feature is not activated, the
RX
END
TAIL
receiver will first hear the persistent click sound.
Activates the FM radio function.
OFF
Scan frequencies or channels.
Scan frequencies and sub-tones.
Set Side Key 2 as the transmit button for Band B.
PF2
LONG
Switch between high and low power.
PRESS
38
Scan frequencies or channels.
Emit an alarm (similar to SOS button function).
Activates FM radio function.
Switch between high and low power.
Emit an alarm (similar to SOS button function).
Number
Switch the inversion of transmit and receive frequencies; toggle off-network
mode where transmit and receive frequencies are the same
Enter DTMF encoding mode.
.
Menu Sub-menu (Options)
No beep after receiving.
TOP
KEY
40
Activate the weather forecast function.
GSTAR
Activate remote sub-tone scanning.
Activates FM radio function.FM Radio
Scan frequencies and sub-tones.
Enter DTMF encoding mode.
Switch between high and low power.
FM Radio
Transmit Power
Scan
Search
Weather Forecast
Remote Sub-tone Scan
PTT B
Activate the weather forecast function.
Enter DTMF encoding mode.
Transmit Power
Scan
Search
Weather Forecast
Alarm
DTMF
37 PF2
Scan frequencies and sub-tones
Scan frequencies or channels.
.
Activate the weather forecast function.
FM Radio
Transmit Power
Scan
Search
Weather Forecast
Alarm
DTMF
PF339
Activate the weather forecast function.
Scan frequencies and sub-tones.
Invert Frequency
DTMF
Weather Forecast
Search