The information to be printed is transmittted in a “bracket” (DC4).
A control sequence (Header) defines the parameters of the used bar-
code once (e.g. type, ratio, etc.).
If no header is defined, the information in the “bracket” will be printed in
Code 2/5 Matrix.
Please note that within the Barcode environment the barcode com-
mands have priority in case of conflicts with the emulation.
Additional information is provided in the Barcode Programmer’s
Application Manual on this CD-ROM.
BACK
QUIT
?
PRINT
Reference manual Emulations
133
To Next Page
Loading...
