Options and Accessories
➤ Options The following options can be ordered for your printer:
Automatic single sheet feeder,
front (ASF-F)
The automatic single sheet feeder is suitable for single sheets and sets
of forms with 1 + 3 forms. Paper formats with a width of 100 to 223 mm
(narrow printer) or 365 mm (wide printer) may be used. Each format in
between can be set.
Part no.: 060 421 (narrow printer)
Part no.: 060 422 (wide printer)
Automatic single sheet feeder,
rear (ASF-R)
The automatic single sheet feeder is suitable for single sheets and sets
of forms with 1 + 2 forms. Paper formats with a width of 100 to 223 mm
(narrow printer) or 365 mm (wide printer) may be used. Each format in
between can be set.
Part no.: 060 423 (narrow printer)
Part no.: 060 424 (wide printer)
Tractor 2, front The push tractor is suitable for fanfold paper and sets of forms with
1 + 5 forms. Paper formats with a width of 76 to 264 mm (narrow printer)
or 406 mm (wide printer) may be used. Each format in between can be
set.
Part no.: 060 419 (narrow printer)
Part no.: 060 420 (wide printer)
BACK
QUIT
?
PRINT
Reference manual Options and Accessories
169
To Next Page
