➤ Pagewid
Select the Pagewid menu (stands for page width).
Setting options: From 20 to 136 in 1/10 inch steps
Default setting: 136/10 Zoll (136 characters at 10 characters/inch)
This parameter determines the actual paper width. If Head up = On, the
printhead moves to the calculated centre of the paper during the time
the paper is moving in the protected zone. If Rightzo = On (see
below), the printhead moves out of the perforation zone on the right as
long as the paper is being transported.
Confirm your settings with the key Set and press the key Next to ac-
cess the next group of parameters.
Head up Pagewid
Online
Setup
Back Next
21
3
4
Pagewid=136/10"*
Online
Setup
Set < > Exit
21
3
4
BACK
QUIT
?
PRINT
Reference manual Mechanical adjustments to the printer
81
To Next Page
Loading...
