Tally T2040 - Exiting Rolling ASCII Test Mode

Example of an ASCII test printout
If you selected a PS font, the printed length of the lines varies.
This test can also be used to determine and set the optimal print-
head gap (see the section Setting the print head gap ).
➤ Exiting Rolling ASCII test
mode
The self-Rolling ASCII test mode test mode can only be terminated by
switching off your printer. For this operation the printer must be Offline.
If you want to stop the test printout before you switch off the
printer, then press the key Online.
STOP
BACK
QUIT
?
PRINT
Reference manual Test functions
71